Do you have a question about the DECOR 1100 and is the answer not in the manual?
Questions and answers
Lynn Cardwell
February 27, 2025
Decor BT 1100 message light continues cannot turn of
1 comments:
Mr. Anderson
February 27, 2025
The message light on the BT Decor 1100 flashes when you have a voice message from BT Answer 1571 or Call Minder. To turn off the message light, you need to listen to and delete your voice messages.
BT Decor 1100 User Guide Please note that you require 4 x AA batteries for the 1571 feature to work. These are not included.
Page 2
Got everything? BT Decor 1100 telephone Base plinth Telephone line cord Wall mounting screws User Guide * Requires subscription to BT’s Call Minder or 1571 Service and 4 x AA batteries must be fitted (not included) for this feature to work.
Getting started Location You need to place your BT Decor 1100 within 3 metres of a telephone socket so that the cable will reach. Your BT Decor 1100 can be wall mounted, see Wall mounting your phone, on page 11.
Page 4
If you prefer to wall-mount your BT Decor 1100, please refer to the instructions shown on page 11. If you want to remove the base plinth, turn the plinth lock switch on the underside of the phone to the ‘unlock’...
Use to change Switch the dial mode. the ringer Use to set the melody. ringer volume. * To use the 1571 feature, you must subscribe to your network’s answering service. Bat If you need any assistance with your product, please visit www.bt.com/producthelp...
Page 6
Red light illuminates when secrecy is on. Red light flashes when you are storing one-touch or quickdial memory numbers. tteries must be installed to be able to use the 1571 button. If you need any assistance with your product, please visit www.bt.com/producthelp...
Your caller will be put on hold. You can now talk to someone in Store the room without your caller hearing you. 2. Press and release the button again to return to your caller. The red secrecy light will go out. Store If you need any assistance with your product, please visit www.bt.com/producthelp...
You should only have to change this setting if connected to a switchboard that requires Pulse dialling. Turn the phone over and move the Mode Switch to the position you want: P, TE or TB. Mode Ringer Ringer Vol. If you need any assistance with your product, please visit www.bt.com/producthelp...
When you dial the number your BT Decor 1100 will automatically insert the pause where you stored it. If you need any assistance with your product, please visit www.bt.com/producthelp...
There is a quickdial memory card located under the handset on your BT Decor 1100 which can be used to keep a record of your quickdial memory numbers / contact names. Lift the plastic plate up and you can write on the label.
If an error occurs while storing a number you will hear three short beeps, then your BT Decor 1100 will return to talk mode. If you unplug your BT Decor 1100 the numbers stored in the memory will be saved. However, the last number redial memory will be lost.
11 Using your phone • IMPORTANT After an incoming call, or after lifting the handset, your BT Decor 1100 will check the line for any messages. You will experience at least a 2 minute delay before the message waiting indicator light flashes if messages have been left.
• Do not open the telephone (except to replace the batteries). Cleaning • Simply clean your BT Decor 1100 with a damp (not wet) cloth, or an anti-static wipe. • Never use household polish as this will damage the product.
Guarantee Your BT Decor 1100 is guaranteed for a period of 12 months from the date of purchase. Subject to the terms listed below the guarantee will provide for the repair of, or at BT’s or its agent’s discretion the option to...
Page 15
Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. Your BT Decor 1100 has a REN of 1. A total REN of 4 is allowed, if the total REN of 4 is exceeded, the telephones may not ring.
Need help?
Do you have a question about the DECOR 1100 and is the answer not in the manual?
Questions and answers
Decor BT 1100 message light continues cannot turn of
The message light on the BT Decor 1100 flashes when you have a voice message from BT Answer 1571 or Call Minder. To turn off the message light, you need to listen to and delete your voice messages.
This answer is automatically generated