Attaching An External Battery - Roland VC-50HD Owner's Manual

Power supply

Attaching an external battery

If you want to supply power from an external battery, you must first attach the holder included with
the VC-50HD to the battery plate. The included holder is compatible with the P-V2 (V-Plate) made by
the IDX Company, Ltd. and with the QRC-GOLD made by Anton/Bauer, Inc.
The battery, battery plate, and power supply cable are not included. You'll need to purchase
these separately from the battery manufacturer.
fig.VC50-with-battery.eps
1.Attach the battery plate (sold separately) to the included holder
Use the four included screws to attach the battery plate (sold separately) to the included holder.
Refer to the photograph below.
fig.plate-and-holder.eps
2.Remove the screws from the top surface of the VC-50HD.
Remove four screws from the top surface of the VC-50HD. To do so, you'll need to use a
screwdriver (no. 1 screwdriver) that is finer-tipped than the screwdriver you used in step 1. Keep
the removed screws in a safe place.
fig.remove-4-from-VC.eps
18