Connecting External Equipment; Connecting Source Equipment - Roland VC-1-SH Owner's Manual

Connecting External Equipment

For information on operation modes refer to "Setting the Operation Mode" (p. 22).

Connecting Source Equipment

Connecting SDI Equipment
Connect a video camera or other device capable of SDI output to the SDI IN
connector.
fig.SDI-IN-connection.eps
Connecting Audio Source Equipment
Connecting an Analog Audio Source
Connect an audio mixer or other analog output to the AUDIO IN connectors.
fig.AUDIO-IN-connection.eps
* This unit is equipped with balanced (TRS) type jacks. Wiring diagrams for these jacks
are shown below. Make connections after first checking the wiring diagrams of other
equipment you intend to connect.
fig.TRS_jack.eps
19