Converting Ieee 1394 To Sdi; Mode Settings For Converting Ieee 1394 To Sdi - Roland VC-50HD Owner's Manual

Connections with video devices

Converting IEEE 1394 to SDI

A signal can be input from an HDV/DV device or computer equipped with an IEEE 1394 (i.LINK)
connector to the VC-50HD, and converted to SDI for output to a video recorder.
Audio channels 1 and 2 of the HDV/DV will be output to the channels you specify as the SDI
output. Refer to "Specifying the audio input/output channels" (p. 27).
fig.ILINK-SDI.eps

Mode settings for converting IEEE 1394 to SDI

For converting HDV/DV to SDI, make the following mode settings.
fig.ILINK-SDI-mode.eps
ON OFF
HDV(1080i)
24
ON ON OFF
HDV(720p)/MPEG-2 TS
ON OFF OFF
ON
DV