Placement And Connections - Roland VC-50HD Owner's Manual

Video field converter
Table of Contents

Advertisement

Placement and connections

Cooling vents
Do not block the cooling vents located on the sides of the VC-50HD. When placing the VC-50HD,
make sure to leave at least 2 cm of space in front of the cooling vents. If the air intake or exhaust are
blocked, the interior temperature will rise, possibly causing heat-related malfunctions.
fig.both-sides.eps
Intake
Theft prevention lock
A commercially available security cable can be attached to the VC-50HD to prevent theft.
For details, refer to the following URL.
http://www.kensington.com/
fig.kensington.eps
Connection cables
Ferrite cores
Six ferrite cores are included with the VC-50HD. Attach these ferrite cores to the IEEE 1394 cables,
HDMI cables, and USB cables that are connected to the VC-50HD. Place the ferrite core around the
cable and press it closed until it clicks shut.
* A ferrite core is attached to the included AC adaptor when it is shipped from the factory. Do not remove this
ferrite core. Attach the ferrite cores to the input/output cables.
* Be careful not to pinch your hand when attaching the ferrite core.
Ferrite Core
Cable quality
Use high-quality cables to make connections. Poor-quality cables may not convey the signal correctly.
14
Exhaust
Ferrite Core

Advertisement

Table of Contents
loading

Table of Contents