Euro Change - Sharp ER-A411 Full Detailed Instruction Manual

■ EURO change

You can program optional functions for EURO change. For the details, refer to EURO Migration Function
section.
Procedure
• TIME (Use the numeric entry)
Preset the time of the date to execute the automatic EURO modifi cation operation.
Enter the hour (00-23)
• PRICE CONVERT (Use the selective entry)
YES: Converts the preset unit prices of Dept./PLU/EAN in the automatic EURO modifi cation operation.
NO: Does not convert the preset unit prices of Dept./PLU/EAN to the ones of EURO currency in the
automatic EURO modifi cation operation.
The preset rate of the Exchange 1 is applied as the conversion rate, and the calculation method
NOTE
is set to "division".
• EURO JOB (Use the selective entry)
NON-COMPUL.:
COMPULSORY:
When the EURO STATUS of your register is already "D" (i.e. the domestic currency has been
NOTE
changed to EURO in your register), this programming is disabled.
Program each item as follows:
• DATE (Use the numeric entry)
Non-compulsory the automatic EURO modifi cation operation in the X2/Z2 mode after
the preset date.
Compulsory the automatic EURO modifi cation operation in the X2/Z2 mode after the
preset date.
Preset the date to execute the automatic EURO modifi cation
operation.
Enter the day (2 digits), month (2 digits), and year (2 digits) in
this sequence.
168