Euro Change - Sharp XE-A307 Instruction Manual

■ EURO Change

You can program optional functions for EURO change. For the details, refer to EURO Migration Function
section.
Procedure
• PRICE CONVERT (Use the selective entry)
YES: Converts the preset unit prices of Dept./PLU/EAN in the automatic EURO modification operation.
NO: Does not convert the preset unit prices of Dept./PLU/EAN to the ones of EURO currency in the
automatic EURO modification operation.
The preset rate of the Exchange 1 is applied as the conversion rate, and the calculation method
NOTE
is set to "division".
• EURO JOB (Use the selective entry)
NON-COMPUL.: Non-compulsory the automatic EURO modification operation in the X2/Z2 mode after
the preset date.
COMPULSORY: Compulsory the automatic EURO modification operation in the X2/Z2 mode after the
preset date.
When the EURO STATUS of your register is already "D" (i.e. the domestic currency has been
NOTE
changed to EURO in your register), this programming is disabled.
Program each item as follows:
• DATE (Use the numeric entry)
Preset the date to execute the automatic EURO modification
operation.
Enter the day (2 digits), month (2 digits), and year (2 digits) in
this sequence.
• TIME (Use the numeric entry)
Preset the time of the date to execute the automatic EURO
modification operation.
Enter the hour (00-23)
101