Plu Level Shift (For Direct Plus) - Sharp ER-A411 Full Detailed Instruction Manual

■ PLU level shift (for direct PLUs)

To use this function on ER-A411, consult your authorized SHARP dealer.
NOTE
This shift can double or triple the number of direct PLUs on your register without adding additional direct PLU
keys. You can use direct PLUs in three levels by utilizing the
Level key shifts the PLU level from the other two to the required level. (The normal level is the level 1.)
You must program your machine in the PGM2 mode to select one of the two PLU level shift modes —
automatic return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the
REG and MGR modes or in the MGR mode alone.
* The automatic return mode automatically shifts the PLU level back to level 1 after pressing a direct PLU
key or fi nalizing each transaction (either can be selected in the PGM2 mode).
** The lock shift mode holds the current PLU level until depression of a PLU level shift key.
Automatic return mode (for PLU levels)
If your register has been programmed for PLU level in the automatic return mode, press a desired PLU level
shift key before a numeric entry.
Procedure
(Returning every item entry)
n
through
L1
(Returning every transaction)
n
through
L1
NOTE
When you use the FF method, you need not press the
Lock shift mode (for PLU levels)
If your register has been programmed for PLU level in the lock shift mode, press a desired PLU level shift
key before a numeric entry.
Procedure
n: PLU shift no. (1 through 3)
n
through
L1
NOTE
When you use the FF method, you need not press the
n: PLU shift no. (1 through 3)
LEVEL
#
Numeric entry
(Q'ty,
L3
LEVEL
#
Numeric entry
(Q'ty,
L3
LEVEL
#
Numeric entry
(Q'ty,
L3
key or PLU level shift keys
Direct PLU
)
Direct PLU
)
@
Direct PLU
)
@
44
\
Return to level 1
(Finalization)
key for multiplication entries.
Stay in the current level
key for multiplication entries.
]
through .