Successive Multiplication Entries - Sharp ER-A411 Full Detailed Instruction Manual

■ Successive multiplication entries

This function is practical for example when you enter a sale of items sold by area (square meter).
To use this function on your register, consult your authorized SHARP dealer.
NOTE
Procedure
• In case of dept. entry
@
Length
• In case of PLU/subdept. entry
@
Length
• In case of EAN entry
@
Length
• After an EAN entry, you may be requested to enter a unit price with the display "UNDEFINED
NOTE
CODE" and beep sound. In this case, enter the unit price and press the
department code and press the
learning function).
• Length or width: up to seven digits (4-digit integer + 3-digit decimal)
• Unit price: less than a programmed upper limit
• Length x Width x Unit price: up to eight digits
When using a programmed unit price
@
Width
When using a programmed unit price
@
Width
@
Width
E
key, and select the delete type with the
Unit price
Department key
2
per m
Unit price
AMT
Unit price Direct PLU
per m 2
Unit price
AMT
Scan EAN code
U
EAN code
33
d
Dept.code
U
PLU code
E
key, enter the
E
key (EAN