Step 4: Setting The Speakers' Channels - Philips LX8300SA User Manual And Service Manual

Getting Started
Step 4: Setting the speakers'
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to your
surroundings and setup.
IMPORTANT!
Press SURR button on the remote
to select Multi-channel surround
mode before adjusting the speaker
settings.
1
Press Ç to stop playback, then press
SYSTEM MENU.
2
Press 2 repeatedly to select {AUDIO
SETUP PAGE}.
3
Press 34 to highlight {SPEAKER SETUP},
then press 2.
4
Enter its submenu by pressing 2.
TIPS:
22
Downloaded From TheatreSystem-Manual.com Manuals
001-047-LX83-22-Eng
channels
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
22
5
Press 34 to highlight one of the options
below at a time, then press 2.
{SPEAKERS VOLUME} – Volume level
setting for individual speakers (-6dB ~
+6dB).
{SPEAKERS DELAY} – Delay times setting
in relation to the listening position/
distance for center and surround
speakers.
6
Press 1 2 to adjust the setting that best
suit your surround sound needs.
7
Press OK to confirm.
Helpful Hints:
– Use the longer delay time settings when
the surround speakers are closer to the
listener than the front speakers.
– The test tone will be automatically
generated to help you judge the sound level
of each speaker.
6/9/04, 2:24 PM
3139 115 23271