Troubleshooting - Philips LX8300SA User Manual And Service Manual

Dvd video / sacd home theater system
Table of Contents

Advertisement

Troubleshooting

WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
No power.
No picture.
Completely distorted picture or
black/white picture.
The aspect ratio of the screen cannot be
changed even though you have set the
TV display.
No sound or distorted sound.
Cannot activate some features such as
Angles, Subtitles, or multi-language
Audio.
Not able to select some Items in the
setup/system menu.
NOTE: When sending the product for servicing, both the DVD main system and the AV subwoofer
are required.
44
Downloaded From TheatreSystem-Manual.com Manuals
001-047-LX83-22-Eng
Problem
44
Solution
Check if the AC power cord is properly
connected.
Press the STANDBY ON on the front of the
DVD system to turn on the power.
Refer to your TV's manual for correct Video In
channel selection. Change the TV channel until
you see the DVD screen.
Press SOURCE to select Disc mode.
If this happens when you are changing the
setting of the 'TV TYPE', wait for 15 seconds
for auto recovery.
If this happens when you are turning on the
progressive scan feature, wait for 15 seconds
for auto recovery.
Check the video connection.
Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
Clean the disc.
The aspect ratio is fixed on the DVD disc.
Depending on the TV, it may not be possible to
change the aspect ratio.
Adjust the volume.
Check the speaker connections and settings.
Make sure that the audio cables are connected
and press the SOURCE button to select the
correct input source (TV or AUX/DI, for
example) to choose the equipment that you
want to hear through the DVD system.
The features may not be available on the DVD.
Changing the language for the sound or
subtitle is prohibited on the DVD.
Press STOP button twice before selecting the
setup/system menu.
Depending on the disc availability, some menu
items cannot be selected.
6/9/04, 2:03 PM
3139 115 23271

Advertisement

Table of Contents
loading

Table of Contents