Setting The Speakers' Channels; Before You Start - Philips HTS3568 User Manual

Getting Started
Setting the speakers'
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to
your surroundings and setup.

Before you start...

Stop the disc playback by pressing x
button twice or remove the disc from
the disc tray. Otherwise, the settings are
not accessible.
A
In disc mode, press OPTIONS on the
remote control.
B
Press
Setup }
C
Select { Speakers Volume } and press
.
D
Use
each speaker (-6dB ~ +6dB) and press
OK to confi rm.
24
1_hts3568_12_eng 1_final.indd 24 1_hts3568_12_eng 1_final.indd 24
Downloaded From TheatreSystem-Manual.com Manuals
(continued)
repeatedly to select { Audio
icon, and press
Audio Setup
Speakers Volume
Speakers Delay
HDMI Audio
Speakers Level Setup
CD Upsampling
Front Left
Audio Sync
Front Right
Center
Subwoofer
Rear Left
Rear Right
Press OPTIONS to exit menu
keys to set the volume level for
E
Use
Delay } and press
Audio Setup
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling
Audio Sync
Press OPTIONS to exit menu
F
Use
(0 ms ~ 15 ms) for centre and rear
speakers that best suit your surround
sound needs.
G
Press OK to confi rm.
Helpful Hints:
.
– A 1ms increase/decrease of delay time is
equivalent to 30 cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be generated to help you
judge the sound level of each speaker.
0dB
0dB
0dB
0dB
0dB
0dB
keys to highlight { Speakers
.
Speakers Distance Setup
Center
Rear Left
Rear Right
keys to set the delay times
2008-07-03 1:24:45 PM 2008-07-03 1:24:45 PM
0ms
0ms
0ms