Audio Setup Menu; Setting The Analogue Output; Speaker Setup; Cd Upsampling - Philips LX8300SA User Manual And Service Manual

DVD Setup Menu Options

Audio Setup Menu

1
In disc mode, press SYSTEM MENU.
2
Press 1 2 to select 'Audio Setup' icon.
3
Press OK to confirm.

Setting the analogue output

Set Analogue Output to match your DVD
home theatre system's playback capability.
This function can also be accessed via the
SURR. button on the remote.
1
In 'AUDIO SETUP PAGE', press 34 to
highlight {ANALOG OUTPUT}, then
press 2.
STEREO
Select this to change channel output to
stereo that delivers sound from only the
two front speakers and subwoofer.
MULTI-CHANNEL
Select this to enable Multi-channel
output.
2
Press 34 to select a setting and press
OK to confirm.
Helpful Hint:
– This feature is not available for SACD
playback.
TIPS:
32
Downloaded From TheatreSystem-Manual.com Manuals
001-047-LX83-22-Eng
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
32

Speaker Setup

This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 22.

CD Upsampling

This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. This function can
also be accessed via the CD UP SAMP.
button on the remote.
If you have activated the upsampling,
the system will automatically switch
to stereo mode.
1
In 'AUDIO SETUP PAGE', press 34 to
highlight {CD UPSAMPLING}, then press 2.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
2
Press 34 to select a setting and press
OK to confirm.
Helpful Hint:
– If you select "Multi-Channel" mode, it will
disable the CD upsampling feature.
Night Mode - turning on/off
7/2/04, 1:21 PM
3139 115 23271