Disc Operations; Playable Discs; Playing Discs - Philips LX8300SA User Manual And Service Manual

IMPORTANT!
– If the inhibit icon (ø or X) appears
on the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
– DVD discs and players are
designed with regional restrictions.
Before playing a disc, make sure the
disc is for the same zone as your
player.
– Do not push on the disc tray or
put any objects other than discs on
the disc tray. Doing so may cause
the disc player to malfunction.

Playable discs

Your DVD home cinema system will
play:
– Digital Versatile Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Super Audio CDs (SACDs)
– Finalised Digital Video Discs +
Recordable[Rewritable] (DVD+R[W])
– Audio Compact Discs (CDs)
– MP3 discs, picture (Kodak, JPEG) files
on CD-R(W).
– JPEG/ISO 9660 format
– Maximum 30 characters display
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz
– Supported Bit-rates : 32~256 (kbps),
variable bit rates
– MPEG-4 files on CD-R[W]:
– Simple profile
– Advanced simple profile (640-480)
– DivX disc on CD-R[W]/DVD+R[W]:
– DivX 3.11, 4.x and 5.x
– GMC (Global Motion Compensation)
and QP (Quarter Pixel) not supported.
TIPS:
Downloaded From TheatreSystem-Manual.com Manuals
001-047-LX83-22-Eng
SUPER VIDEO
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
23

Disc Operations

Region Codes
The regional code 'X' (denotes the
number) of this device is shown at
the back panel of this device. If
the DVD is marked with a
different region code, it cannot be
played on this device.
Helpful Hints:
– It may not be possible to play CD-R/RW or
DVD-R/RW in all cases due to the type of
disc or condition of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improperly formatted discs will not play on
this DVD system.

Playing discs

1
Press SOURCE control until "DISC"
appears on the display panel.
➜
The DISC LED on the remote will light
up for a few seconds.
2
Turn on the TV power and set to the
correct Video In channel. (See page 19
"Setting the TV").
➜
You should see the blue DVD
background screen on the TV.
3
Press OPEN/CLOSE
the disc tray and load a disc, then press
the same button again to close the disc
tray.
➜
Make sure the disc label is facing up.
For double-sided discs, load the side you
want to play face up.
4
Playback will start automatically.
➜
If a disc menu shows on the TV, see
page 25 "Using the Disc Menu".
➜
If the disc is locked by parental control,
you must enter your six-digit password.
(See pages 36-37).
6/9/04, 2:02 PM
ALL
X
0
once to open
23
3139 115 23271