Step 3: Setting Language Preferences; On-Screen Display (Osd) Language; Audio, Subtitle And Disc Menu Languages - Philips LX8300SA User Manual And Service Manual

Step 3: Setting language
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc's default setting language will
be used instead. The OSD (on-screen
display) language for the system menu will
remain as you set it, regardless of various
disc languages.

On-screen display (OSD) language

1
In disc mode, press SYSTEM MENU.
2
Press 2 to select {GENERAL SETUP
PAGE}.
3
Press 34 to highlight {OSD
LANGUAGE}, then press 2.
4
Press 34 to select a language and press
OK to confirm.
TIPS:
Downloaded From TheatreSystem-Manual.com Manuals
001-047-LX83-22-Eng
preferences
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
21
Getting Started
Audio, Subtitle and Disc menu
languages
1
Press Ç twice to stop playback (if any),
then press SYSTEM MENU.
2
Press 2 repeatedly to select
{PREFERENCE PAGE}.
3
Press 34 to highlight one of the options
below at a time, then press 2.
– {AUDIO} (disc's soundtrack)
– {SUBTITLE} (disc's subtitles)
– {DISC MENU} (disc's menu)
4
Press 34 to select a language and press
OK to confirm.
If the language you want is not in
the list, then select {OTHERS}.
Use the numeric keypad (0-9) on the
remote to enter the 4-digit language code
'XXXX' (see page 5) and press OK to
confirm.
5
3 4
Repeat steps ~
6/9/04, 2:02 PM
for other settings.
21
3139 115 23271