Step 3: Setting Language Preferences; On-Screen Display (Osd) Language; Audio, Subtitle And Disc Menu Languages - Philips LX3900SA/69 Manual

Getting Started
Step 3: Setting language
preferences
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc's default setting language will
be used instead. The OSD (on-screen
display) language for the system menu will
remain as you set it, regardless of various
disc languages.

On-screen display (OSD) language

1
In disc mode, press SETUP.
2
Press 2 to select {GENERAL SETUP
PAGE}.
3
Press 34 to highlight {OSD
LANGUAGE}, then press 2.
4
Press 34 to select a language and press
OK to confirm.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SETUP.
18
001-041-LX39-22-Eng1
Audio, Subtitle and Disc menu
languages
1
Press Ç twice to stop playback (if any),
then press SETUP.
2
Press 2 repeatedly to select
{PREFERENCE PAGE}.
3
Press 34 to highlight one of the options
below at a time, then press 2.
– {AUDIO} (disc's soundtrack)
– {SUBTITLE} (disc's subtitles)
– {DISC MENU} (disc's menu)
4
Press 34 to select a language and press
OK to confirm.
If the language you want is not in
the list, then select {OTHERS}.
Use the numeric keypad (0-9) on the
remote to enter the 6-digit language code
'XXXX' (see page 223 "Language Code")
and press OK to confirm.
5
Repeat steps
18
3 4
~ for other settings.
3139 115 22871
12/12/2003, 10:20 AM