Power Specifications; Ac Power Supply; Appendix A Server Specification - Cisco UCS C220 M4 Installation And Service Manual

Appendix A Server Specifications

Power Specifications

The power specifications for the power supply options are listed in the following sections:
•
You can get more specific power information for your exact server configuration by using the Cisco UCS
Power Calculator:
http://ucspowercalc.cisco.com
Do not mix power supply types in the server. Both power supplies must be identical.
Note
770 W AC Power Supply
Table A-3
(Cisco part number UCSC-PSU1-770W).
Table A-3
Description
AC input voltage
AC input frequency
Maximum AC input current
Maximum input volt-amperes
Maximum output power per PSU
Maximum inrush current
Maximum hold-up time
Power supply output voltage
Power supply standby voltage
Efficiency rating
Form factor
Input connector
OL-32473-01
770 W AC Power Supply, page A-3
lists the specifications for each 770 W AC power supply
Power Supply Specifications
Specification
Nominal range: 100–120 VAC, 200–240 VAC
(Range: 90–132 VAC, 180–264 VAC)
Nominal range: 50 to 60Hz
(Range: 47–63 Hz)
9.5 A at 100 VAC
4.5 A at 208 VAC
950 VA at 100 VAC
770 W
15 A (sub-cycle duration)
12 ms at 770 W
12 VDC
12 VDC
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
RSP2
IEC320 C14
Cisco UCS C220 M4 Server Installation and Service Guide
Power Specifications
A-3