Enabling Sata Mode And Selecting Option Rom Mode - Cisco UCS C220 M4 Installation And Service Manual

Hide thumbs Also See for UCS C220 M4:
Table of Contents

Advertisement

Embedded SATA RAID Controllers

Enabling SATA Mode and Selecting Option ROM Mode

Set the SATA mode for managing the two boot drives:
Step 1
a.
b.
c.
Note
d.
Note
Optional: Set the SATA option ROM mode for the two boot drives (only with LSI SW RAID SATA
Step 2
mode):
a.
b.
Step 3
Press F10 to save your changes and exit the utility.
Cisco UCS C220 M4 Server Installation and Service Guide
C-14
Boot the server and press F2 when prompted to enter the BIOS Setup utility.
Choose the Advanced tab, and then choose LOM and PCIe Slots Configuration.
Select PCH SATA Mode and then choose one of the options from the dialog:
AHCI—Not used at this time.
Disabled—The embedded RAID controller is disabled.
LSI SW RAID—In supported server versions, you can manage the internal SSD boot drives or
the front-facing drives by using the server's embedded SATA RAID controller.
Before you change from LSI SW RAID mode to AHCI mode, delete all the RAID volumes
configured in the connected physical drives.
If you selected LSI SW RAID mode and you want to set the option ROM mode, continue with the
next step. If not, skip to
Step
There is no option ROM mode setting in AHCI SATA mode.
Choose the Advanced tab, and then choose LOM and PCIe Slots Configuration.
Select PCH SATA OPROM Mode and then choose one of the options from the dialog:
Enabled—You can boot from these boot drives. You can use the UEFI management interface or
the free-standing legacy management utility.
Disabled—You cannot boot from these boot drives.
UEFI Only—Select this to enable booting but manage RAID only by using the UEFI version of
the LSI utility that is built into the server BIOS. See
Configuration Utility, page
Legacy Only—Select this enable booting but manage RAID only by using the free-standing
version of the LSI utility. See
page
C-15.
3.
C-15.
Launching the LSI Embedded RAID Configuration Utility,
Appendix C
RAID Controller Considerations
Launching the LSI Embedded RAID
OL-32473-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents