Special Considerations For Cisco Ucs Virtual Interface Cards - Cisco UCS C220 M4 Installation And Service Manual

Hide thumbs Also See for UCS C220 M4:
Table of Contents

Advertisement

Chapter 3
Maintaining the Server

Special Considerations for Cisco UCS Virtual Interface Cards

Table 3-6
The server can support up to two PCIe-style VICs plus one mLOM-style VIC.
If you use the Cisco Card NIC mode, you must also make a VIC Slot setting that matches where your
Note
VIC is installed. The options are Riser1, Riser2, and Flex-LOM. See
Settings, page
If you want to use the Cisco UCS VIC card for Cisco UCS Manager integration, also see the
C-Series Server Integration with UCS Manager Guides
cabling, and other requirements.
Table 3-6
Cisco UCS C220 M4 Requirements for Virtual Interface Cards
Virtual Interface Card
(VIC)
Cisco UCS VIC1225
UCSC-PCIE-CSC-02
Cisco UCS VIC1225T
UCSC-PCIE-C10T-02
1
Cisco UCS VIC1385
UCSC-PCIE-C40Q-03
Cisco UCS VIC 1227
UCSC-MLOM-CSC-02
Cisco UCS VIC 1227T
UCSC-MLOM-C10T-02
1. For Cisco UCS VIC1385, always use the primary slot 1 for optimal performance. You can use the other supported slot, but you might see degraded
performance. If multiple VIC cards are present, give the Cisco UCS VIC1385 priority on primary slot 1 for best performance.
The Cisco UCS VIC 1227 (UCSC-MLOM-CSC-02) is not compatible to use in Cisco Card NIC mode
Note
with a certain Cisco SFP+ module. Do not use a Cisco SFP+ module part number 37-0961-01 that has a
serial number in the range MOC1238xxxx to MOC1309xxxx. If you use the Cisco UCS VIC 1227 in
Cisco Card NIC mode, use a different part number Cisco SFP+ module, or you can use this part number
37-0961-01 if the serial number is not included in the range above. See the data sheet for this adapter for
other supported SFP+ modules:
OL-32473-01
describes the requirements for the supported Cisco UCS virtual interface cards (VICs).
2-14.
Number of
This VIC
Supported
Slots That
in Server
Support VICs
2 PCIe
PCIE 1
PCIE 2
2 PCIe
PCIE 1
PCIE 2
2 PCIe
PCIE 1
PCIE 2
1 mLOM
mLOM
1 mLOM
mLOM
for details about supported configurations,
Primary Slot For
Cisco UCS
Primary Slot For
Manager
Cisco Card NIC
Integration
Mode
PCIE 1
PCIE 1
PCIE 1
PCIE 1
Not supported at
PCIE 1
this time
mLOM
mLOM
mLOM
mLOM
Cisco UCS VIC 1227 Data Sheet
Cisco UCS C220 M4 Server Installation and Service Guide
Installing or Replacing Server Components
NIC Modes and NIC Redundancy
Cisco UCS
Minimum
Cisco IMC
Minimum VIC
Firmware
Firmware
1.4(6)
2.1(0)
1.5(1)
2.1(1)
2.0(4)
4.0(4b)
2.0(3)
4.0(0)
2.0(4)
4.0(4b)
3-41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents