VTech VCS754 Administrator And Provisioning Manual page 31

Setting
Authentication password
Dial Plan
Inter Digit Timeout (secs)
Maximum Number of
Calls
Page Auto Answer
Feature Synchronization
DTMF method
Unregister after reboot
Using the WebUI
VCS754 Administrator and Provisioning Manual
Description
If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Enter the dial plan, with dialing strings separated by a |
symbol. See "Dial Plan" on page
Sets how long the VCS754 waits after any "P" (pause) in
the dial string or in the dial plan.
Select the maximum number of concurrent active calls
allowed for that account.
When set to Auto, enables the VCS754 to automatically
answer when a page is received. This is usually the desired
behavior for paging.
Enables the VCS754 to synchronize with Broadworks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on the
VCS754 menu and WebUI. Similarly, changes made using
the VCS754 or WebUI will update the settings on the
server.
Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
Enables the phone to unregister the account(s) after
rebooting-before the account(s) register again as the
phone starts up. If other phones that share the same
account(s) unregister unexpectedly in tandem with the
rebooting VCS754, disable this setting.
31
32.
Back to Contents