Select Bridge (WDS) and click Next. You will enter the WDS setup page as the picture
below.
Bridge (WDS) working mode includes: Point-to-Point Bridge (WDS P2P), Point-to-Multipoint
Bridge (WDS P2MP), Wireless Repeater (Repeater).Users can select the mode according to
need. Please refer to Chapter 4.1.2 for detailed introduction.
Then click Open Scan, ceiling AP will scan and list all the available wireless device nearby
automatically (see the picture below). Select the ceiling AP which you need to bridge and
click Next to enter the WDS Security setup interface. On the other hand, you can enter the
MAC address of wireless device which you want to bridge manually and select the
corresponding channel.
8