versa VX-AP450N User Manual page 16

should select WDS P2P bridge modes. The topology shows below:
Select WDS P2MP mode in the drop-down list of WDS Mode as the picture below.
 AP MAC (Address): Input the remote AP's MAC address. (Maximum 4)
 Channel: Select the channel which bridge needs to use (all ceiling APs in the bridge
must be at the same channel).
 Open Scan: When you lick this button, it will scan and list all the available wireless
devices automatically. Select the device which need to bridge, it will add the device's
MAC address automatically and select the corresponding channel. When multiple
devices are added, it will select the channel of the last added ceiling AP as the bridge
16