Table of Contents
Advertisement
Setting Explanation
WPA Algorithm: There are TKIP (Temporal Key Integrity Protocol), AES (Advanced
Encryption Standard) and TKIP&AES. The default is TKIP mode.
Key Renewal Interval: Set the key's renewal period.
Radius Server Address: Enter the IP address of the Radius server.
Radius Server Port: Enter the authentication port of the Radius server. The default is
1812.
Shared Key: Enter the shared key for authentication server with 8~63 ASCII characters.
Session timed out: The authentication interval period between ceiling AP and
authentication server. The default is 3600s.
802.1X Authentication
This security mode is used when a RADIUS server is connected to the ceiling AP. 802.1x, a
kind of Port-based authentication protocol, is an authentication type and strategy for users.
The port can be either a physic port or logic port (such as VLAN). For wireless LAN users, a
port is just a channel. The final purpose of 802.11x authentication is to check if the port can
be used. If the port is authenticated successfully, you can open this port which allows all the
messages to pass. If the port isn't authenticated successfully, you can keep this port disable
which just allows 802.1x authentication protocol message to pass. Select 802.1X from the
drop-down list to enter the following page:
22
Advertisement
Table of Contents
