4.4
Access Control
To secure your wireless LAN, the wireless access control is actually based on the MAC
address management. Select Wireless Settings -> Access Control to display the following
page:
Setting Explanation
MAC Address Filter: Enable or disable MAC address filter by selecting Close, Allow,
or Block. Select Close to malfunction MAC address; Block to prevent the MAC
addresses in the list from accessing the wireless network; Allow to allow the MAC
address in the list to access the wireless network.
MAC Address Management: Input the MAC address to implement the filter policy.
Click Add to finish this setting.
MAC List: Shows the MAC addresses added. You can add or delete them.
Note: Ceiling AP supports no more than 32 MAC addresses.
26