versa VX-AP450N User Manual page 24

WDS security setting provides three encryption modes: WEP, TKIP, and AES encryption.
 WEP Key: You can set the WEP key in ASCII code or Hexadecimal code.
 Key: You can choose ASCII code (5 or 13 ASCII codes, illegal characters like "/" are
forbidden) or Hexadecimal characters (10 or 26 Hexadecimal characters).
 TKIP/ AES Encryption Key: TKIP/AES is an encryption mode based on WPA and
WPA2.
 Key: Key characters are ASCII codes from 8 to 63.
Note: The encryption mode and password of each ceiling AP in the bridge must be
consistent in order to establish the connections. You are recommended to encrypt
the bridge to protect the wireless bridge.
The security setup page of wireless repeater is as follow:
There are two parts of security setting in WDS AP Repeater mode: AP Security Settings
and WDS Security. AP security setting focuses on wireless client access, while WDS
security setting focuses on wireless bridge connection. AP security setting appears only
when wireless client accesses are permitted in wireless repeater mode. Please refer to
Chapter 4.2.1 for AP Security Setting.
24