1. SSID: Set the SSID of the device.
2. Channel: Select the wireless communication channel. The default is channel 6.
After you finish the settings, click Next to enter the AP Security Settings page as the
picture below:
AP Security Settings is used to encrypt the settings for ceiling AP and authorize the
wireless client to access the AP for security in wireless network. Please refer to Chapter
4.1.1.2 for detailed security setting specifications.
After finishing the settings, click Next to finish settings as the picture below.
3.4 Bridge (WDS) Mode
Select Setup Wizard on the left menu and the working mode selection will appear as the
picture below.
7