Appendix III: WDS Application Instances
The configurations of P2P, P2MP and Wireless Repeater in WDS mode are mostly the same.
The number of devices which need to be configured is different according to different mode.
The following steps take P2P for example.
If you want to establish P2P transmission between AP1 and AP2, you need to set the
parameters as follows:
Select WDS mode in Setup Wizard for AP1 and set the SSID as AP1 and select channel 1.
The BSSID is 00:23:28:05:4E:D0.
Click Next to enter the WDS Security setting.
39