Bridge (Wds) Mode - versa VX-AP450N User Manual

 BSSID: Basic Service Set Identifier of wireless network. In IEEE802.11, BSSID is the
MAC address of wireless access point.
 WLAN Isolation: The access control feature based on wireless MAC address. When
this feature is enabled, each of your wireless clients will be in its own virtual network and
will not be able to communicate with each other. This feature is to isolate the
communication of wireless clients connected with different ceiling AP.
 Channel: Specify the effective channel (from 1 to 13\Auto Select) of the wireless
network.
 Extension Channel: To increase data throughput of wireless network, the extension
channel range is used in 11n mode.
 Channel Bandwidth: Select the proper channel bandwidth to improve the wireless
performance. 20M bandwidth can improve the anti-jamming ability of the wireless device.
40M bandwidth can improve the flux of 11N client.

4.1.2 Bridge (WDS) Mode

Bridge (WDS) mode includes WDS P2P, WDS P2MP, and WDS AP Repeater.
4.1.2.1 Point to Point Bridge
WDS P2P bridge mode can connect with two wired network via wireless access points,
which communicate by wireless signals and not by cables. This mode can be free from the
cable trouble. The P2P topology shows below:
Select SSID broadcast in drop-down list of WDS Mode as the picture below:
14