Chapter 6 Systemtools; Change Password; Restore To Factory - versa VX-AP450N User Manual

Chapter 6 System Tools
This section focuses on how to maintain ceiling AP. Including Change Password, Restore to
Factory, Backup/Restore, Upgrade (firmware), Reboot, and System Log.

6.1 Change Password

This section is to set a new user name and password to better secure your ceiling AP and
network. Click Apply after you complete.
 User Name: Enter a new user name for the device.
 Old Password: Enter the old password.
 New Password: Enter a new password.
 Re-enter to Confirm: Re-enter to confirm the new password.
NOTE: It is highly recommended to change the password to secure your network and
the ceiling AP.
6.2

Restore to Factory

This is to reset all configurations to the default values. It means the ceiling AP will lose all the
settings you have set.
Restore: Click this button to restore to default settings.
Factory Default Settings:
User Name: admin
Password: admin
30