IBM 6C1 Service Manual page 153

Table 3. Firmware Error Codes. (continued)
Error Code Description
2BA00104 Service processor firmware update file is
the same level as the service processor
firmware, update cancelled.
2BA00200 Service processor firmware update error
occurred, update not completed.
Error occurred during service processor
flash write operation.
2BA00201 Service processor firmware update error
occurred, update not completed.
Error occurred while reading service
processor CRC.
2BA00202 Service processor firmware update error
occurred, update not completed.
Error occurred while verifying service
processor firmware CRC.
2BA00203 Service processor firmware update error
occurred, update not completed.
Error occurred while reading new service
processor firmware CRC after updating
service processor firmware.
2BA00204 Service processor firmware update error
occurred, update not completed.
Error occurred while calculating firmware
CRC.
2BA00300 Service processor reports slow fan
number 1.
2BA00301 Service processor reports slow fan
number 2.
2BA00302 Service processor reports slow fan
number 3.
Action / Possible Failing FRU
1. Obtain new level of service
processor firmware.
2. Retry operation.
Service processor firmware update
error recovery procedure:
1. Turn off the system.
2. Unplug power cable and then plug
power cable back in.
3. Turn on the system.
4. Replace the system board.
Location: P1
(See note 3 on page 115.)
See error code 2BA00200 for
recovery procedure.
See error code 2BA00200 for
recovery procedure.
See error code 2BA00200 for
recovery procedure.
See error code 2BA00200 for
recovery procedure.
1. Replace fan 1.
Location: F1
2. Replace the system board.
Location: P1
(See note 3 on page 115.)
1. Replace fan 2.
Location: F2
2. Replace the system board.
Location: P1
(See note 3 on page 115.)
1. Replace fan 3.
Location: F3
2. Replace the system board.
Location: P1
(See note 3 on page 115.)
Chapter 5. Error Code to FRU Index
135