Table 2. Firmware Checkpoints. (continued)
Checkpoint
E243
E244
E246
E247
E249
E297
E298
E299
E3xx
E440
E441
E442
108
Service Guide
Description
Setup configuration registers.
Enable system speaker and send a
beep.
System firmware corrupted, take
recovery path.
Capture memory module SPDs into
NVRAM.
Enter recover path's main code.
Start firmware softload path execution.
Start firmware recovery path execution.
Start C code execution.
Memory test
Validate NVRAM, initialize partitions as
needed.
Generate /options node NVRAM
configuration variable properties.
Validate NVRAM partitions.
Action/ Possible Failing FRU
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
See "Unresolved Checkpoint Problems"
on page 85.
See "Unresolved Checkpoint Problems"
on page 85.
See "Unresolved Checkpoint Problems"
on page 85.
See "MAP 1240: Memory Problem
Resolution" on page 49.
1. Verify that the system and service
processor firmware levels are at the
current release levels; update as
necessary.
2. Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
1. Verify that the system and service
processor firmware levels are at the
current release levels; update as
necessary.
2. Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
1. Verify that the system and service
processor firmware levels are at the
current release levels; update as
necessary.
2. Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.