IBM 6C1 Service Manual page 116

Table 2. Firmware Checkpoints. (continued)
Checkpoint
E160
E161
E162
E164
E168
E170
E171
98
Service Guide
Description
CPU node VPD creation
Root node VPD creation
Service processor node VPD creation
Create PCI graphics node (P9)
Create PCI graphics node (S3)
Start of PCI bus probe
Executing PCI-Delay function
Action/ Possible Failing FRU
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
1. If a location code is associated with
the checkpoint:
v Replace the FRU identified by the
location code
v Replace, one at a time, the other
PCI adapter cards on the same
PCI bus. See "Bus SRN to FRU
Reference Table" on page 178.
v Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
2. If no location code is associated
with the checkpoint, go to MAP
1540: Minimum Configuration, "Step
1540-24" on page 81.
1. If a location code is associated with
the checkpoint:
v Replace the FRU identified by the
location code
v Replace, one at a time, the other
PCI adapter cards on the same
PCI bus. See "Bus SRN to FRU
Reference Table" on page 178.
v Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
2. If no location code is associated
with the checkpoint, go to MAP
1540: Minimum Configuration, "Step
1540-24" on page 81.