Printing Reports; Fax Reports; Transmission Verification Report - Brother MFC-790CW User Manual

10

Printing Reports

Fax reports

You need to set up the Transmission
Verification Report and Journal Period using
the MENU button.
Transmission Verification
Report
You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the time and date of transmission
and whether the transmission was successful
(OK). If you choose On or On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Choosing On+Image or Off+Image will print
a section of the fax's first page on the report
to help you remember.
When the Transmission Verification Report is
turned Off or Off+Image, the Report will
only print if there is a transmission error, and
the fax could not be sent.
Note
If you choose On+Image or Off+Image,
the image will only appear on the
Transmission Verification Report if Real
Time Transmission is set to Off. (See Real
time transmission on page 39.)
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Report Setting.
e
Press Report Setting.
f
Press Transmission.
g
Press On, On+Image, Off or
10
Off+Image.
h
Press Stop/Exit.
10
10
10
77