Speaker Volume; Sleep Mode - Brother MFC-790CW User Manual

Speaker Volume

You can choose a range of speaker volume
levels, from High to Off.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display Volume.
e
Press Volume.
f
Press Speaker.
g
Press Off, Low, Med or High.
h
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Speaker Phone.
a
Press Speaker Phone.
b
Press d or c to display Volume.
c
Press Volume.
d
Press d or c.
This setting will stay until you change it
again.
e
Press Speaker Phone.
Note
• You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM's) by pressing d or c.
• If you turn Incoming Recording Monitor to
OFF the Speaker for screening calls will
be disabled and you won't hear callers
leaving messages. The volume for other
operations can still be controlled using
d or c.

Sleep Mode

3
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display Sleep Mode.
e
Press Sleep Mode.
f
Press 1 Min, 2 Mins, 3 Mins,
5 Mins, 10 Mins, 30 Mins or
60 Mins which is the length of time the
machine is idle before entering sleep
mode.
g
Press Stop/Exit.
General setup
3
3
27