Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-790CW User Manual

5

Sending a Fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
FAX/TEL FAX/TEL
Fax Resolution Contrast
Standard Standard Auto Auto
History
Press d or c to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 39.)
Contrast (See page 38.)
Broadcasting (See page 37.)
Preview (See page 36.)
Delayed Fax (See page 40.)
Batch TX (See page 40.)
Real Time TX (See page 39.)
Polled TX (See page 81.)
Polling RX (See page 79.)
Overseas Mode (See page 40.)
Glass ScanSize (See page 35.)
Set New Default (See page 41.)
Factory Reset (See page 41.)
Press the option you want.
34

Faxing from the ADF

5
a
b
c
Broadcasting
Off Off
d
Speed Dial
Press (Fax).
Place the document face down in the
ADF. (See Using the ADF on page 21.)
Enter the fax number using the dial pad.
You can also enter the fax number by
pressing Speed Dial, press the
number you want and press
Send a fax.
Note
You can preview a fax message before
sending it by setting Preview to On.
For details, see How to preview an
outgoing fax on page 36.
Press Mono Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
5
5