Custom Audio Electronics TK300II Command Reference Manual page 100

SVELTA Emulation
<F n>
Printers: KPM300
[Name]
Select the font
[Format] ASCII
[Range]
[Description] Selects the current font where n indicates the font to use.
[Notes]
[Default]
[Reference]
[Example]
<HW height, width>
Printers: KPM300
[Name]
Set height and width of the current font
[Format] ASCII
[Range]
[Description] Modifi es the height and width of the current font where height and width are the multiplier
coeffi cients of heigth and width of how enlarge the font.Both values can be:
[Notes] The command is ignored if height or width has different value from that reported above.
[Default]
[Reference]
[Example]
<KEYS x>
Printers: KPM300
[Name]
Enable/Disable keys panel
[Format] ASCII
[Range] x = 0, 1
[Description] Enables / disables the keys panel.
• When x = 0, the keys panel is enabled.
• When x = 1, the keys panel is disabled.
[Notes] • When the keys panel is disabled, the keys may only be used after the printer has been
reset.
[Default] n = 0
[Reference]
[Example]
100
Command Reference
, KUBE II
VeriPrint
<F n>
, KUBE II
VeriPrint
<HW height, widht>
1: Font dimension ×1
2: Font dimension ×2
3: Font dimension ×3
4: Font dimension ×4
5: Font dimension ×5
6: Font dimension ×6
7: Font dimension ×7
8: Font dimension ×8
, KUBE II
VeriPrint
<KEYS x>
, KUBE-L
VeriPrint VeriPrint
, KUBE-L
VeriPrint VeriPrint
, KUBE-L
VeriPrint VeriPrint
, TK300II
VeriPrint
, TK300II
VeriPrint
, TK300II
VeriPrint