Armrest Adjustment; Swivel Seat - Rascal Vantage Owners Manual & Service Record

Warning!
Never attempt to disassemble or adjust the braking system. Any maintenance must be carried
out by your authorised dealer.

Armrest adjustment

When preparing to sit on the scooter, first lift one armrest to enable easy access (Fig.6). When riding always have
the armrests in the down position. Avoid pinching fingers as you lower the armrest. If you require more room in
the width of the seat, undo the knobs at the rear of the seat (Fig.7). Slide the armrests in or out to suit. Tighten
both knobs to lock the armrest width adjustment in place. To ensure that the user is sitting centrally, the armrests
should always be adjusted to be equidistant from the centre of the seat.
Warning!
Never drive with the armrest up or with the armrest knob loose.

Swivel seat

This allows easy access
1. To operate, locate the release lever under the seat (Fig.8).
2. Pull the lever up and the seat will release allowing it to rotate.
3. Release the lever and the seat should lock automatically, but always
check it has.
Warning!
Do not use this device if the vehicle is on a slope. Always check the seat is locked in the
forward position before driving the vehicle.
6 7
8
11