Armrest Adjustment; Seat Back Adjustment; Swivel Seat; Sliding Seat - Rascal Vista Owner's Manual

Armrest adjustment

When getting seated on the scooter lift the armrest
up. When riding always have the armrest in the down
position. Avoid pinching fingers as you lower the
armrest. If you require more room in the width of the
seat undo the knobs at the rear of the seat. (Fig.9)
Slide the armrests in or out to suit. Tighten both
knobs to clamp. To ensure that the user is sitting
centrally, the armrests should always be adjusted to
be equidistant from the centre of the seat.
9
Warning!
Never drive with the armrest up or
with the armrest knob loose.

Seat Back Adjustment

The angle of the seat back is fixed, however it can
be folded to allow easy storage and handling. To fold
the seat, hold it by the top edge and push forward
(Fig.10) Note: The Vista scooter is available with 2
different seat options. Captain seat and standard
seat. Image shown is the standard seat.
10
10

Swivel Seat

This allows easy access
1. To operate, locate the release lever under the
seat. (Fig.11)
2. Pull the lever up and the seat will release
allowing it to rotate.
3. Release the lever and the seat should lock
automatically, but always check it has.
11
Warning!
Do not use this device if the vehicle
is on a slope. Always check the seat is locked
in the forward position before driving the vehicle.

Sliding Seat

This allows you to obtain the most comfortable
position for your particular build/height.
1. To operate, locate the release lever under the
right hand side of the seat. (Fig.12)
2. Pull the lever up and the seat will release
allowing it to slide backwards and forwards.
3. Release the lever and the seat should lock
automatically in position, but always check it has.
12
Rascal Vista and Vista DX Scooters Owner's Manual and Service Record