Advanced Functions; Web; Viewing System Log; Viewing System Parameters - 4xem IPVS1A User Manual

Advanced functions

Web

Viewing system log

Click the button on the configuration page to view the system log file. T he content of the file reveals
useful information about configuration and connection after the system boots up.

Viewing system parameters

Click the button on the configuration page to quickly view the whole system parameter set. T he content is
the same as CONFIG.INI.

Restore factory default settings

Click the button on the configuration page to restore the factory default settings. This means any changes
made before will be lost and the system will be reset to the initial status when shipped from the factory.
After confirmation, the system will restart and require the installer program to setup the network.

Clear data path for proprietary commands

Video Server provides a highly customized control support to third-party serial interface devices aside
from PT Z cameras. That means in addition to setting up a custom camera with PTZF commands, users
may utilize this mode and introduce a customized homepage to transmit arbitrary user-defined commands
from the user-side to Video Server. T he third-party device connected to the serial port of Video Server
will receive the same command sent by the originator. The user only needs to attach the command in
ASCII format after the special URL. Video Server will parse the command and transfer into binary code
to send out. See the clear data mode serial port driver in the URL commands of Video Server section for
detailed description.
69