4xem IPVS1A User Manual page 21

While checking " Use this IP whenever system boots", a dialog window may pop out to ask for " Server
FTP Port" and " Root Password" because they are already changed to other than default settings. If the
settings are lost, restore default settings and use installer to install again.
Once installation is complete, administrators should follow the actions in the "First access to Video
Server" section for necessary checks and configurations. Experienced administrators may use the
customized config.ini script file to perform a quick setup via FTP. Detailed procedure can be found on the
section " One-shot fast configuration via FT P".
To allow users to connect to Video Server through an easily memorized name, the administrators must
first configure the name server in his network. Here is an example: When the administrator wants to set
up Video Server with a fixed IP address and let users connect to Video Server by typing a name instead of
IP address, the administrator may reserve the IP from DHCP service and assign it with name in the
domain name service. During Video Server installation, assign the ready IP address. After successful
installation, users may access the Video Server by the given name.
14