4xem IPVS1A User Manual page 98

Electromagnetic Compatibility (EMC)
US A -
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonabl e protection against harm ful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, i f not installed
and used in accordance with the instructions, may cause harmful interferen ce to radio communications. However,
there is no guarantee that interference will not occur in a partial installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the seperation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
Europe -
This digital equipment fulfills the requirement for radi ated emission according to limit B of
.
EN55022/1998, and the requirement for immunity according to EN50082-1/1992
Liability
4xem Corp. cannot be held responsible for any technical or typographical errors and reserves the right to make
changes to the product and manuals without prior notice. 4xem Corp. makes no warranty of any kind with regard to
the material contained within this document, including, but not limited to, the implied warranties o f merchantability
and fitness for a particular purpose.
4XEM Corporation
Website: www.4xem.com
Email: sales@4xem.com
Rev. 1.00 Made in Taiwan. ©Copyright 2001. All rights reserved.
91