Table of Contents
Advertisement
How to Install
To easily fit into various environments, Video Server automatically detects the attached interfaces and
configures itself to the best condition. Therefore users need not care whether the connected cameras are
either NT SC or PAL, how to select the network between Ethernet and modem, and whether the Ethernet
speed is 10Mbps or 100 Mbps. If the connected motorized camera is on the support list, users only need
to plug and play without complicated configurations.
Video Server supports Ethernet and modem interfaces according to the user's existing network. Ethernet
can provide higher bandwidth to achieve the best performance while dial-up network with modem is more
common in current Internet applications. Refer to the related installation section for your network
environment. If both interfaces are available, Ethernet is recommended and will be chosen as the first
priority if Ethernet cable and modem are concurrently attached. Managing to install in the other interface
will automatically clear the previous network settings to start new installation.
In the following content, "user" refers to those who can access Video Server and "administrator" refers to
the supervisor who has the root password to configure Video Server in addition to general access.
Administrators should carefully read this manual, especially during installation.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the IPVS1A and is the answer not in the manual?