Belling FSG 60TC Owner's Manual page 22

USING THE PROGRAMMER / CLOCK - GAS (if fitted)
The programmer buttons
The 'function' button in the centre is used
for setting the minute minder and setting
up the automatic cooking. See below for
details.
To set the time of day
When the power is turned on to the appli-
ance, the time of day starts from 0.00.
Press and release the
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the
buttons while the 'dot' beween the hours
and minutes is flashing.
To select an alarm tone
Press and hold the
to listen to the first tone. Release the
button and press it again to listen to the
second tone, etc. Releasing the button
after the tone has sounded will
automatically select that tone.
(minus) and
and
(minus) button
Setting the minute minder
Press and release the function button. The
minute minder bell symbol will appear
and flash on the display. Use the plus and
minus buttons to set the required alarm
time. After setting, the display will revert to
show the time of day and the bell symbol
will stop flashing. Pressing the function
button will display the minutes remaining.
If the time has counted down to the last
minue, the remaining seconds are shown.
The tone will sound at the end of the time
set. To cancel the tone, press the function
button.