MasterCraft MIG 180 Instruction Manual page 31

27
4" spool installation
4. Slide a 4" spool (1) on the hub and
secure the washer (2), bushing (3) and
the wing nut (4) sequentially
to step 7
Note: Ensure the spool is not firmly tightened.
It should be able to move easily.
8" spool installation (optional)
5. Slide an 8" spool adaptor (1) on the hub
and secure the washer (2), bushing (3) and
wing nut (4)
Note: Ensure the spool adaptor is not firmly
tightened. It should be able to move easily.
6. Slide the 8" spool over the adaptor
7. Place the spool on the hub with the wire
passing from the bottom of the spool into
the drive mechanism
(fig 1Z).
.
(fig 2A).
(fig 2C)
.
MIG 180 INVERTER WELDER 058-9306-4
fig 1Z
Go
fig 2A
(fig 2B).
fig 2B
fig 2C
4
3
2
MC-589306-35
4
3
2
MC-589306-36
MC-589306-37
MC-589306-38
1
1
1
X