General Maintenance; Moving The Appliance; Electrical Or Electronic Product At End Of Service Life - Krups ESPRESSERIA AUTOMATIC User Manual

3 – Second rinsing
At the end of the first rinsing, the 'calc' light will flash.
A second automatic cycle will last 6 minutes.
Remove your waste
water recipient and the
drip tray then fit them
again.
If there is not enough water in the water tank, you will be warned by the 'fill water tank' light.
Add the appropriate amount of water to the tank and scale removal will continue automatically.
If the coffee grounds collector is not fitted you will be warned by the 'empty coffee grounds collector' light flashing.
Fit the collector again for the cycle to continue automatically.
If a power failure occurs during the cycle, you will have to start it up again from the start.
If your product is equipped with our Claris-Aqua Filter System cartridge F088 - Please remove this
cartridge during the descaling operation.
Be sure to complete the entire scale removal cycle to avoid any risk of intoxication.
The scale removal cycle is a discontinuous cycle. Do not put your hands under the coffee outlets
during the cycle.
Make certain to protect your work surface during cleaning and scale removal cycles, especially if they
are made of marble, stone or wood.
Always remove the power supply cord from the socket and let your appliance cool down before cleaning it.
Do not use utensils or cleaning products likely to scratch or corrode the appliance.
Wipe the body of the appliance on the outside using a moist cloth.
Clean the cleaning tray,
the drip tray, the coffee
grounds collector and
the drip tray grid with hot
water and a liquid
detergent.
Keep the packing and use it again to move the appliance.
If the unpacked appliance is dropped, it is advisable to have it inspected by an authorised Service Dealer.

ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE

Let's all help protect the environment!
Your appliance contains many recyclable materials that can be re-used.
Take it to a civic waste collection point.
Again press the 'Service'
key. The 'calc' light
will become steady.
A second automatic cycle
will last 6 minutes.

GENERAL MAINTENANCE

MOVING THE APPLIANCE

Once the second
rinsing is finished,
the 'calc' light will
go off.
Empty the drip tray and
then fit it again.
Your appliance is now ready for use again.
11
± ± 6 6 m m n n
Empty and then fill
your water tank.
Rinse the water tank
with fresh water.