General Maintenance - Krups Evidence+ EA894T Manual

Table of Contents

Available languages

Maintenance

All of these options allow you to run the selected programs. You should then follow the on-screen instructions.

Provides access to cleaning the machine's one touch cappuccino block, which is essential

Cleaning milk

for ensuring good quality milk frothing.

Provides access to rinsing the machine's one touch cappuccino block, which is essential for

Milk rinsing

ensuring good quality milk frothing.

Provides access to rinsing the machine's coffee circuit, which ensures the optimum taste

Coffee rinsing

of coffee.

Provides access to cleaning the machine's coffee circuit (using a cleaning tablet), which

Coffee cleaning

ensures the optimum taste of coffee.

Provides access to descaling which is essential for the durability of your machine. When the

Descaling

number of drinks is not high enough for descaling to be necessary, the function is not active.

Provides access to the filter mode, useful if the water is very hard, in order to ensure the best

Filter

taste and the health of your machine.

To quit the Cleaning menu, press

Info

The "Info" menu provides access to information about your use and about certain stages in the life of your machine. It

also informs you about its upkeep. Below are the main details available.

Drinks prepared

Coffee circuit cleaning

Descaling

Filter

To quit the Info menu, press

Emptying the coffee grounds collector and the drip tray

After a certain number of coffees, the machine will ask you to empty the coffee grounds collector and the drip tray. Not

to make correctly these operations can damage your machine.

The drip tray collects used water and the coffee grounds collector collects used ground coffee.

If the message "Please empty the two trays" is displayed, remove, empty and clean the drip collector tray. Remove,

empty and clean the coffee grounds collector (C). Fig. 19.

Replace the coffee grounds collector. Fig. 20

The drip tray is equipped with a float to indicate when it needs emptying. However, the machine is also programmed to

ask for the drip collector tray to be emptied after a certain number of coffees, in addition to any intermediate emptying

operations that you may complete.

Rinsing the circuits:

You can start rinsing at any time by pressing

According to the type of recipe prepared, the machine may complete an automatic rinsing when it is turned off.

It is also possible to set an automatic rinse program when it is switched on (see "Settings" section p.22).

or the Settings button.

Displays the number of drinks prepared

Indicates that is needs to be completed within x number of cycles.

Indicates that it will need to be changed in x days or x litres.

or the Settings button.