Basic Configuration; Monitoring; View Basic Screen; View Single Image In Full Screen - Samsung SVR-1630 User Manual

오류! 스타일이 정의되어 있지 않습니다.

Basic Configuration

3. Monitoring

When the SVR-1630 is on, images from all channels are displayed in Monitor Mode. (When 8
Channels are connected, the images are displayed on the 3x3 split screen). This section is for using
all the SVR-1630 monitoring modes.
<Cautions>
The SVR-1630 supports dual monitors (A and B). Monitor A (Normal) supports all the functions
described below and Monitor B (Spot) doesn't support split screen, or Menu and Zoom functions. When
Monitor A is in Playback Mode, Monitor B doesn't work in Playback Mode.
Therefore the functions described below are based on Monitor A.
In addition, Monitor A should be activated for functional controls.

3.1 View Basic Screen

- When the power is switched on, the SVR-1630 starts automatically.
- The LED goes on and booting is started.
- After the completion of booting, the screen is
displayed in split display mode, depending on
the number of channels connected (the figure
to the right is an example of 4 Channel
display)
※ If a User Password is set, the Password
Input window is shown.

3.2 View Single Image in Full Screen

- Enter the channel number to view.
- Press the [MULTI] button, and the split
screen is displayed again.

3.3 View Multi-Screens

- Press the [MULTI] button to simultaneously
view multiple channels.
- Each time the [MULTI] button is pressed, the
screen is switched to 2x2, 3x3 and 4x4 Split
Screen Mode in sequence
Samsung Techwin CO.,Ltd.
2004.07.2001 (v 1.0)
SVR-1630
13