Network Setup - Samsung SVR-1630 User Manual

SVR-1630

5.7.6 Network Setup

There are 5 sub-menus; Network, xDSL, SWR, Port Settings, and NTP Settings
5.7.6.1 Network
When the SVR-1630 is connected to a network, the relevant network information is set in this menu.
Type
Sets the type (Ethernet/xDSL) of network line connected to the SVR-1630. When the SVR-1630 is
connected to a private line, cable modem or LAN, set to "Ethernet".
When the SVR-1630 is connected to an xDSL line with the PPPoE method, set to "xDSL". However, if
an xDSL line is connected, but not with PPPoE, set to 'Ethernet'.
DHCP
Activates the DHCP function when the DVR is automatically received IP from the DHCP server.
'DHCP' is used in LAN environments where the DHCP Server is activated. For mid-range and large
operations, the DHCP Server is operated with a LAN. For small operations, the NAT (Network Address
Translation) function of the HUB is generally used.
IP Address, NetMask, and Gateway Address, DNS
Sets the IP address, Network Mask, Broadcast address, Gateway address and DNS address.
54
오류! 스타일이 정의되어 있지 않습니다.
2004.07.2001 (v 1.0)
Samsung Techwin CO.,Ltd.