Live Screen Configuration - Samsung SRD-830 User Manual

LIVE SCREEN CONFIGURATION

Icons on the Live Screen
You can check the status or operation of the DVR with the icons on the live screen.
Name
Current Date, Time
Login Information
Screen Mode
System Operation
Video Input Status
Camera Name/ Channel
Camera Operation
2010-01-01 00:00:01
CAM 01
Displays the current time and date.
When you are logged in, the "LOG ON" icon will be displayed.
Displayed if the zoom function is activated.
Displayed if you press the Pause button.
Displayed in Auto Sequence mode where all channels are switched at the
specific time interval.
Displayed if the recording is in process.
M To cancel the recording, enter the password.
Displayed if there is a problem with the cooling fan.
Displayed if the HDD is full and the DVR has an insufficient space to record.
Displayed if no HDD is installed or the existing HDD should be replaced.
Displayed if the HDD needs a technical examination.
Displayed if a new firmware is found from the network.
Displayed if no input is entered in the condition that the camera is set to <ON>.
Nothing will be displayed on the screen if the camera is set to < OFF>.
Displays the camera name and the changed channel, if any.
Displays the resolution of the recording screen. (Page 56)
Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.
Displays AUDIO ON/MUTE.
Not displayed in video mode if deactivated.
If the sensor is set to <ON>, the input signal will be displayed on the screen of
the connected channel.
Displayed if a motion detected in the condition that the motion detection is set to
<ON>.
Displays the current record mode from Record/Event/Schedule.
Description
English
�
L
I V
E
_27