Front LCD panel
Figure 1.
Basic Configuration
Add power to the unit using the Power button on the rear panel (Figure 1), Use the down arrow on the front
panel to find and select the Network Setup menu(Figure 3) then click ENTER.
Figure 3.
Now select Option 1. Use Static IP (Figure 5) then click ENTER
Figure 5.
Set the IP address and Subnet Mask for the Monitor port (Figure 6), use this IP address to connect via Web
Server.
Now select Option 1. Monitoring Port (Figure 4)
then click ENTER
Figure 2.
Figure 4.
Figure 6.